The Online Civil Engineering Portal
Q.1) Which of the following has more fire-resisting characteristics? A) Marble B) Limestone C) Compact sand stone D) Granite Answer Option (C) Q.2) Which of the following timbers is suitable for making sports goods? A) Mulberry B) Mahogany C) Sal D) Deodar Answer Option (A) Q.3) Excess of alumina in brick earth makes the brick…
Q.1) Which of the following is known as design capacity? A) Basic capacity B) Theoretical capacity C) Possible capacity D) Practical capacity Answer Option (D) Q.2) Scientific planning of transportation system and mass transit facilities in cities should be based on : A) Spot speed data B) Origin and destination data C) Traffic volume data…
Read More “Transportation Engineering | MCQ – 06 | 20 MCQs” »
Q.1) The difference between the most probable value of a quantity and its observed value is : A) True value B) Weighted observation C) Conditional error D) Residual error Answer Option (D) Q.2) ‘Ranging’ is the process of : A) Fixing ranging rods on the extremities of the area B) Aligning the chain in a…
Q.1) Strength of concrete increases with : A) Increase in w/c ratio B) Increase in fineness of cement C) Decrease in curing time D) Decrease in size of aggregate Answer Option (B) Q.2) The most commonly used admixture which prolongs the setting and hardening time is : A) Gypsum B) Calcium chloride C) Sodium silicate…
Q.1) Optimum depth of kor watering for rice is – A) 135 mm B) 165 mm C) 190 mm D) 215 mm Answer Option (C) Q.2) The “Outlet Discharge Factor” is the duty at the head of – A) Main canal B) Branch canal C) Water course D) Distributory Answer Option (C) Q.3) The ratio…
Q.1) A Pycnometer is used to determine : A) Water content and Voids ratio B) Specific gravity and dry density C) Water content and specific gravity D) Voids ratio and dry density Answer Option (C) Q.2) Which of the following is a measure of particle size range? A) Effective size B) Uniformity coefficient C) Coefficient…
Q.1) Metacentric height for small values of angle of heel is the distance between the – A) Centre of gravity and centre of buoyancy B) Centre of gravity and metacentre C) Centre of buoyancy and metacentre D) Free surface and centre of buoyancy Answer Option (B) Q.2) Stream lines and Path lines always coincide in…
Q.1) Standard EDTA (ethylene diamine tetra acetic acid) solution is used to determine : A) Hardness in water B) Turbidity in water C) Dissolved oxygen in water D) Residual chlorine in water Answer Option (A) Q.2) Turbidity is measured on – A) Standard silica scale B) Standard cobalt scale C) Standard platinum scale D) Platinum…
Read More “Environmental Engineering | MCQ – 07 | 20 MCQs” »
Q.1) The water absorption for good brick should not be more than – A) 10% of its dry weight B) 15% of its dry weight C) 10% of its saturated weight D) 15% of its saturated weight Answer Option (B) Q.2) Strength based classification of brick is made on the basis of : A) IS…
Q.1) A camber consisting of two straight slopes joining at the centre is called – A) Barrel camber B) Sloped camber C) Composite camber D) None of the above Answer Option (B) Q.2) The raising of outer edge of the road above the inner edge is known as – A) Super-elevation B) Cant C) Banking…
Read More “Transportation Engineering | MCQ – 05 | 20 MCQs” »
